HomeExpertReviewsBlogTips&Trickshttps://homeexpertreviews.com/how-to-plug-a-car-tire/How to Plug a Car Tire

Guide on How to Plug a Car Tire

Guide on How to Plug a Car Tire
Last Updated: 21 August 2019

There is nothing worse than having a flat tire, and it can happen at that worst possible time. However, if you know the necessary information on how to bung flat hoop, you can get back on your road in no time.

If you notice that there is still air inside your hoop in spite of having a flat hoop, you can save a lot of money when you repair it instead of buying that new one as a replacement. This guide will help you to make the straightforward repair will only take 15 minutes of your time.

There are considerations, however, and that puncture should not be on this sidewall. If that hole on your hoop is on the sidewall, do not bung it. There are different pressures on this sidewall than this part of your hoop that touches the road. If you bung your sidewall, it may burst or can result in that blowout.

Hoop repair kit should be at your car’s tools compartment every time. You can purchase them at many stores with auto parts or any store that sells maintenance supplies for vehicles. It should not cost you more than $10.

Three Important Questions about Plugging a Tyre

Before proceeding with these instructions on how to plug a tire, here are these three essential questions that we need to answer first.

#1 Is It Safe to Drive with a Car Tire Plug?

It will be safe to drive with that plugged car hoop because it will prevent these slow leaks from turning your tyres flat. Driving with slow leaks can make your vehicle unstable, which is dangerous when negotiating with that sharp corner as it can be tipped over. Slow leaks also force your car to use more fuels as an irregularly shaped bung needs more energy to rotate. If you add more weight, it can put more strain on these wheels.

You should not bung that hoop when it has covered less than 50,000 miles, or it is new. Tyres that have more than that quarter of an inch should not have a tire repair plug.

#2 Which Is Better a Tire Repair Plug or a Patch?

Plugging a tire is an only temporary remedy. You still need to replace this tyre as plugging does not address these problems with these inner walls. There is a higher chance that you have that bigger problem on this part because of this friction between that inner walls and rim.

Patching, on that other hand, repairs these slow leaks and holes with a piece of rubber that is smeared with special glue. This is better than plugging as it can provide a solution to these internal problems with your tyres.

#3 How Long Can You Drive Using a Plugged Tyre?

Because a bung provides only temporary relief, it is just enough to bring you to that tyre shop. A nicely done bung can let you drive 2,000 miles maximum, and it can even vary with how old your item is. That new hoop can cover about 3,000 miles.

If you are driving in that hot area, it can extend further because that temperature can make hoop expand. This can heat these adhesives even more and hold that bung together.

How to Bung a Car Tire?

Step 1. Remove This Flat Tyre

  • Look for that safe area to park your car. If you are on your road, you need to pull over and turn on your hazard lights.
  • Put your hazard signs in the front and back of your car, particularly at night to enhance visibility.
  • Put a brace on these good wheels.
  • Using a car jack and stands, raise your vehicle to remove that hoop.

Step 2. Remove the Object on the Puncture

  • Get a pair of work gloves from your tool kit to protect your hand from foreign objects or wires sticking out of that damaged hoop?
  • Closely inspect the tyre for the sharp object. You might need a flashlight for this.
  • Gently rotate the tyre to check the threads and use your fingers to explore for protruding objects.
  • Once located, remove the foreign object with a pair of pliers.

Step 3. Check the Damage and Assess If You Can Plug a Tire

  • If the car hoop is bald, it needs replacement and plugging will not work.
  • If the car tyre has a problem with the valve system, it also needs replacement.
  • If you find unusual swellings on the hoop, you can bung it.
  • If the hoop has a diagonal cut, it will require patching.

Step 4. Get Your Tire Bung Kit

  • The kit has an item and these tools you need to bung your tyre.
  • The flat tire repair plugs are made of leather between two rubbers. It needs scissors to cut into strips.
  • It also includes a corkscrew to push the bung into your car hoop.

Step 5. How to Plug a Car Tire?

  • Using this provided corkscrew, you need to make a circular hole (turning this corkscrew in a clockwise direction).
  • That item should be completely dry and avoid using too much force as it can tear that nearby threads.
  • Get this item and straighten it out.
  • Cover this item with the adhesive provided with the kit.
  • Place that item at the tip of the corkscrew and push it down into the hole in the tyre.
  • Once this item is entirely inside, pull the corkscrew. Do this fast to avoid the corkscrew from sticking into the bung.

How to Fix a Flat Tire Without a Tire Bung?

Step 1. Tools Needed

  • Gorilla Glue
  • Old tyre
  • A pair of pliers
  • pair of work gloves
  • Air compressor
  • A set of screwdrivers

Step 2. Locate the Piercing Object

  • Using work gloves, feel for any protruding object from the tyre.
  • Check the spaces in between the treads.
  • Once you found out, use pliers to pull the object out.
  • If the sharp object is buried, pry it out with a flathead screwdriver.

Step 3. Improvise Your Tire Bung

  • Using heavy-duty scissors, cut out a piece of rubber from an old tyre.
  • It should be thin enough to fit into the puncture but thick to maintain stability while in motion.
  • Smear it with adhesives and stick this piece firmly into the hole.
Share your thoghts
    • Please fill required fields
    • Please fill required fields
    • Please fill required fields
    • Was it helpful?: