Everybody loves a beautiful and timeless look as part of their decor. Some designs are more of a necessity rather than a norm, like in this case of whitewash wood. Homes with such timber have a unique, sophisticated touch that we all love. So, how do you whitewash wood?
There is many upcoming modern finishing, but nothing brings out that splendor of wood like a whitewash wood finish. This process is very simple, and once you have this procedure, you can do it yourself.
If you’re not in the know, whitewashing wood is limewash traditionally. The whitewashed look has become one of that most loved interior and exterior design in our world. It brings out a farmhouse look that is captivating and clean. Just be careful you can’t do everything once you learn that technique.
If you love that stunning look of timber, then read on to find out that procedure of how to whitewash furniture.
Things to Remember:
Some vital things cut across all this procedure regardless of the one you choose according to your preference.
- Always work with clean wood. Make sure your timber is fresh by getting rid of stickers, unwanted nails, and ensuring your wood has nothing that will hinder a beautiful finish. In case you use a cleaning solution to remove unwanted residue from that wood, let this timber dry before proceeding with whitewashing it.
- Know how to mix your paint. That right consistency will deliver a magnificent and satisfactory finish. This most recommended procedure that provides that right thickness and transparency is one-part water and one-part colorant type of mixing. Make sure you mix this colorant and water well by stirring well. If you want a lighter result, mix two parts water with one-part colorant.
- When it comes to applying, remember to use a paintbrush or rag depending on that kind of thickness you desire. As you apply this colorant, follow that direction of your timber grain for a rustic finish. Use a moist rag to wipe down areas where that colorant is to thick. Follows these steps and you’ll have a beautiful finish.
These are Some of Whitewash Painting Technique
Step 1: Paint and Water
Mix even parts of water and colorant until that colorant comes to be semi-transparent and permits your timber grain to be seen. This method is highly recommended if that surface is smooth or if it’s new lumber to create a flawless and even modern look.
- White Paint
- Mixing Cup
- Mix the water and colorant using equal parts until you have this the desired consistency
- Once you have desired mixture use the rag to apply it evenly to your timber making sure it has even layer
- Dry and put on another coat until you have an opacity that works
If you are planning to use these steps for a large project, it is recommended you lay the board across a flat surface like sawhorses while painting.
Step 2: Paint and Wax
This technique is recommended if the surface of your timber is not evenly smooth. Before painting, it is best if you will smoothen the high points first using the wax. It works magic on all types of timber by creating a vintage white washed wood look that is chirpy.
- White colorant
- Clear or White Wax Candle
- Water (optional)
- Rub the wax along your planks using this side of your timber, doing it quickly to leave that residue of wax behind on the wood’s surface
- Using the white colorant, color the whole surface and let it dry for about 20 minutes until it’s tacky
- Scrab the surface using the rag and remove colorant by apply pressure over the wax areas. If you feel like it, dampen the rag with water to remove even more colorant until you have the desired look
- If it’s a large project, it will take more than one day to complete.
Step 3 Paint and Drag
This procedure is highly recommended for surfaces with high texture, such as rough or reclaimed planks, it delivers a Barnwood, rustic look
- White Paint
- Plastic Scrapper
- Pour a bit of the paint directly at the center of the planks
- Using the scraper, smear the paint across the timber and fill in the planks grain grooves
- Repeat the steps above until you have an even look then let it dry overnight
If you’ve been wondering how to whitewash timber and come up with an attractive finish, there are some factors you also have to consider.
- With whitewash planks, time plays an essential role if delivering the desired finish. The longer leave this paint before wiping it off the more color density you’ll have and the whiter your timber will be. If you want flexibility with all the amount of paint, you can remove you will have to wipe off the paint before it dries.
- Don’t let that paint dry on your timber if still planning to change this intensity of this paint.
- If you prefer a lighter finish, it is best if let this paint dry completely, and then do that whitewashing steps again.
- Sand off more of white once that paint is dry to give these planks a more weathered look.
- Coat this wood depending on where you are going to place it. Coats of polyacrylic or other water-based sealers are recommended for whitewashed timber that is placed outside or in the bathroom.
You are now completely equipped with this complete knowledge of how to whitewash wood. You can make your home the haven you want it to be.